
Shaper Hollow FramesStep By Step Instructions How to Assemble a Shaper Hollow Frames Here's all my pieces printed onto white linen cardstock (in the pic I've also created my own insert) Cut across the centre and cut away the excess Then I go in for "proper" cut TOP TIP I find it easier to come from underneath with my scissors when cutting out a confined space and here's the pieces cut out, I've glamour dusted the inside piece and cut a piece of acetate for the window 12cm square Apply DST around the frame on the inside and attach the acetate From the back of both pieces level the sides, drop back a tiny bit so the back can't be seen from the front, holding both pieces firmly flip over and pierce with a pokey tool to form holes through both as shown below repeat for the other side Attach together with brads. Because the front is wider than the back it will dome as in the pic Front View Next create a tent fold base card (or make it into an easel card if you prefer) Cut Then Fold Apply the adhesive to half of the Shaper Then Position the shaper on the card. .....The Finished Card Tutorial By Of Wendy Carr |